How to clean a commercial vertical all - glass display cabinet?

Before cleaning a commercial vertical display cabinet, it is necessary to understand its composition. This equipment is composed of four - sided all - glass, with two classic colors, black and white. There are 4 - 6 layers of shelves inside, and it has a relatively large capacity. However, the entire cleaning process is very convenient.

How to clean the inside?

To clean the inside of the vertical display cabinet, wet a towel with a mixture of detergent and water. This can clean oil stains and dust on the inside. Just open the side door. After cleaning the inside, do not close the door immediately. Instead, ventilate for about 10 minutes to keep the inside of the cabinet dry before closing the door.

How to clean the body of the vertical cabinet?

Use the same method. Wipe it 2 - 3 times with a wet towel. If there is a lot of dust and cooking oil fumes on the surface of the equipment, after scrubbing the surface with detergent, wipe it twice with a clean wet towel, and then let the water on the surface dry.

What are the precautions for the glass display cabinet?

1. Pay attention to power off

When cleaning the dust inside and outside the equipment, it must be powered off for work. Live - working is prohibited.

2. It is strictly prohibited to rinse with a large amount of water

Rinsing with a large amount of water can cause internal component failures. It is recommended to just wipe it clean with a wet towel.

3. Pay attention to using it in a ventilated and dry environment

Keep it away from humid places with water sources. This can cause short - circuits in the circuit and corrode the components of the vertical cabinet, resulting in great losses. Therefore, a dry and ventilated environment is required.

What are the maintenance tips?

For the all - glass display cabinet, regularly clean the dust, not only on the surface. About every six months, a deep cleaning is required, that is, disassemble the machine to clean the dust in important parts such as the fan and add lubricant. These are all important maintenance processes.